adding a bunch of stuff (vim, nvim, bspwm)

tmuxssh allow to connect and attach or create a tmux session.

.gitignore

@@ -2,5 +2,3 @@ vim/.vim/.netrwhist
 vim/.vim/bundle
 
 !vim/.vim/bundle/Vundle.vim
-
-__pycache__/

.gitmodules

@@ -103,30 +103,3 @@
 [submodule "vim/.vim/pack/autoload/start/vim-textidote"]
 	path = vim/.vim/pack/autoload/start/vim-textidote
 	url = https://github.com/PatrBal/vim-textidote
-[submodule "nvim/.config/nvim/pack/autoload/start/nvim-dap"]
-	path = nvim/.config/nvim/pack/autoload/start/nvim-dap
-	url = git@github.com:mfussenegger/nvim-dap
-[submodule "nvim/.config/nvim/pack/autoload/start/LanguageTool.nvim"]
-	path = nvim/.config/nvim/pack/autoload/start/LanguageTool.nvim
-	url = git@github.com:vigoux/LanguageTool.nvim
-[submodule "nvim/.config/nvim/pack/autoload/start/nvim-dap-ui"]
-	path = nvim/.config/nvim/pack/autoload/start/nvim-dap-ui
-	url = git@github.com:rcarriga/nvim-dap-ui
-[submodule "nvim/.config/nvim/pack/autoload/start/nvim-jdtls"]
-	path = nvim/.config/nvim/pack/autoload/start/nvim-jdtls
-	url = git@github.com:mfussenegger/nvim-jdtls
-[submodule "nvim/.config/nvim/pack/autoload/start/nvim-lspconfig"]
-	path = nvim/.config/nvim/pack/autoload/start/nvim-lspconfig
-	url = git@github.com:neovim/nvim-lspconfig
-[submodule "nvim/.config/nvim/pack/autoload/start/nvim-nio"]
-	path = nvim/.config/nvim/pack/autoload/start/nvim-nio
-	url = git@github.com:nvim-neotest/nvim-nio
-[submodule "nvim/.config/nvim/pack/autoload/start/ranger.vim"]
-	path = nvim/.config/nvim/pack/autoload/start/ranger.vim
-	url = git@github.com:francoiscabrol/ranger.vim
-[submodule "nvim/.config/nvim/pack/autoload/start/reply.vim"]
-	path = nvim/.config/nvim/pack/autoload/start/reply.vim
-	url = git@github.com:rhysd/reply.vim
-[submodule "nvim/.config/nvim/pack/autoload/start/vim-dispatch"]
-	path = nvim/.config/nvim/pack/autoload/start/vim-dispatch
-	url = git@github.com:tpope/vim-dispatch

aerc/.config/aerc/accounts.conf

@@ -1,71 +0,0 @@
-[minecraftonitch]
-source        = imaps://minecraftonitch%40gmail.com@imap.gmail.com:993
-source-cred-cmd = cat $HOME/.config/pass/minecraftonitch_aerc.txt
-outgoing      = smtps://minecraftonitch%40gmail.com@smtp.gmail.com:465
-outgoing-cred-cmd = cat $HOME/.config/pass/minecraftonitch_aerc.txt
-default       = INBOX
-archive       = [Gmail]/All Mail
-postpone      = [Gmail]/Drafts
-from          = tonitch <minecraftonitch@gmail.com>
-cache-headers = true
-
-# carddav-source          = https://minecraftonitch%40gmail.com@www.googleapis.com/carddav/v1/principals/minecraftonitch@gmail.com/lists/default
-# carddav-cred-cmd = cat $HOME/.config/pass/minecraftonitch_aerc.txt
-# address-book-cmd        = carddav-query -S minecraftonitch %s
-
-[d.tonitch]
-source        = imaps://d.tonitch%40gmail.com@imap.gmail.com:993
-source-cred-cmd = cat $HOME/.config/pass/dtonitch_aerc.txt
-outgoing      = smtps://d.tonitch%40gmail.com@smtp.gmail.com:465
-outgoing-cred-cmd = cat $HOME/.config/pass/dtonitch_aerc.txt
-default       = INBOX
-archive       = [Gmail]/Tous les messages
-from          = "anthony debucquoy (tonitch)" <d.tonitch@gmail.com>
-cache-headers = true
-
-# carddav-source          = https://d.tonitch%40gmail.com@www.googleapis.com/carddav/v1/principals/d.tonitch@gmail.com/lists/default
-# carddav-cred-cmd = cat $HOME/.config/pass/dtonitch_aerc.txt
-# address-book-cmd        = carddav-query -S d.tonitch %s
-
-[debucquoy.anthony]
-source           = imaps://debucquoy.anthony%40gmail.com@imap.gmail.com:993
-source-cred-cmd  = cat $HOME/.config/pass/debucquoyanthony_aerc.txt
-outgoing         = smtps://debucquoy.anthony%40gmail.com@smtp.gmail.com:465
-outgoing-cred-cmd  = cat $HOME/.config/pass/debucquoyanthony_aerc.txt
-default          = INBOX
-archive          = [Gmail]/Tous les messages
-from             = "Debucquoy Anthony" <debucquoy.anthony@gmail.com>
-cache-headers    = true
-# carddav-source          = https://debucquoy.anthony%40gmail.com@www.googleapis.com/carddav/v1/principals/debucquoy.anthony@gmail.com/lists/default
-# carddav-cred-cmd  = cat $HOME/.config/pass/debucquoyanthony_aerc.txt
-# address-book-cmd = carddav-query -S debucquoy.anthony %s
-
-[herisson]
-source        = imaps://tonitch@mail.herisson.ovh:993
-source-cred-cmd = cat $HOME/.config/pass/herisson_aerc.txt
-outgoing      = smtp://tonitch@mail.herisson.ovh:587
-outgoing-cred-cmd = cat $HOME/.config/pass/herisson_aerc.txt
-default       = INBOX
-from          = tonitch <tonitch@herisson.ovh>
-cache-headers = true
-
-[University]
-source            = imaps+xoauth2://231687%40umons.ac.be@outlook.office365.com:993
-source-cred-cmd   = python3 $HOME/.config/aerc/mutt_oauth2.py $HOME/.config/pass/231687@umons.ac.be.tokens
-outgoing          = smtp+xoauth2://231687%40umons.ac.be@smtp.office365.com:587
-outgoing-cred-cmd = python3 $HOME/.config/aerc/mutt_oauth2.py $HOME/.config/pass/231687@umons.ac.be.tokens
-default           = INBOX
-cache-headers     = true
-archive           = Archives
-# from              = "Debucquoy Anthony" <cpumons@umons.ac.be>
-from              = "Debucquoy Anthony" <anthony.debucquoy@student.umons.ac.be>
-
-[EnCheminVers]
-source        = imaps://info%40encheminvers.be@imap.mail.ovh.net:993
-source-cred-cmd = cat $HOME/.config/pass/encheminvers_aerc.txt
-outgoing      = smtps://info%40encheminvers.be@smtp.mail.ovh.net
-outgoing-cred-cmd = cat $HOME/.config/pass/encheminvers_aerc.txt
-default       = INBOX
-from          = Anthony <info@encheminvers.be>
-copy-to       = Sent
-cache-headers = true

aerc/.config/aerc/aerc.conf

@@ -1,863 +0,0 @@
-#
-# aerc main configuration
-
-[general]
-#
-# Used as a default path for save operations if no other path is specified.
-# ~ is expanded to the current user home dir.
-#
-default-save-path=~/Downloads/aerc/
-
-# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
-# operations. If set to "internal", the internal openpgp keyring will be used.
-# If set to "auto", the system gpg will be preferred unless the internal
-# keyring already exists, in which case the latter will be used.
-#
-# Default: auto
-pgp-provider=auto
-
-# By default, the file permissions of accounts.conf must be restrictive and
-# only allow reading by the file owner (0600). Set this option to true to
-# ignore this permission check. Use this with care as it may expose your
-# credentials.
-#
-# Default: false
-#unsafe-accounts-conf=false
-
-# Output log messages to specified file. A path starting with ~/ is expanded to
-# the user home dir. When redirecting aerc's output to a file using > shell
-# redirection, this setting is ignored and log messages are printed to stdout.
-#
-#log-file=
-
-# Only log messages above the specified level to log-file. Supported levels
-# are: trace, debug, info, warn and error. When redirecting aerc's output to
-# a file using > shell redirection, this setting is ignored and the log level
-# is forced to trace.
-#
-# Default: info
-#log-level=debug
-
-# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
-# in an existing aerc instance, and don't start an IPC server to allow
-# subsequent aerc instances to run commands in the current one.
-#
-# Default: false
-#disable-ipc=false
-
-# Don't run mailto:... commands over IPC; start a new aerc instance with the
-# composer instead.
-#
-# Default: false
-#disable-ipc-mailto=false
-#
-# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
-# file instead.
-#
-# Default: false
-#disable-ipc-mbox=false
-
-# Set the $TERM environment variable used for the embedded terminal.
-#
-# Default: xterm-256color
-term=st-256color
-
-# Display OSC8 strings in the embedded terminal
-#
-# Default: false
-#enable-osc8=false
-
-# Default shell command to use for :menu. This will be executed with sh -c and
-# will run in an popover dialog.
-#
-# Any occurrence of %f will be replaced by a temporary file path where the
-# command is expected to write output lines to be consumed by :menu. Otherwise,
-# the lines will be read from the command's standard output.
-#
-# Examples:
-#   default-menu-cmd=fzf
-#   default-menu-cmd=fzf --multi
-#   default-menu-cmd=dmenu -l 20
-#   default-menu-cmd=ranger --choosefiles=%f
-#
-#default-menu-cmd=
-
-[ui]
-#
-# Describes the format for each row in a mailbox view. This is a comma
-# separated list of column names with an optional align and width suffix. After
-# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
-# characters can be added (by default, left) followed by an optional width
-# specifier. The width is either an integer representing a fixed number of
-# characters, or a percentage between 1% and 99% representing a fraction of the
-# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
-# width specifiers. Auto width columns will be equally attributed the remaining
-# terminal width. Fit width columns take the width of their contents. If no
-# width specifier is set, '*' is used by default.
-#
-# Default: flags:4,name<20%,subject,date>=
-#index-columns=flags:4,name<20%,subject,date>=
-
-#
-# Each name in index-columns must have a corresponding column-$name setting.
-# All column-$name settings accept golang text/template syntax. See
-# aerc-templates(7) for available template attributes and functions.
-#
-# Here are some examples to show the To field instead of the From field for
-# an email (modifying column-name):
-#
-# 1. a generic one
-#   column-name={{ .Peer | names | join ", " }}
-# 2. based upon the selected folder
-#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
-#
-# Default settings
-#column-flags={{.Flags | join ""}}
-#column-name={{index (.From | names) 0}}
-#column-subject={{.ThreadPrefix}}{{.Subject}}
-#column-date={{.DateAutoFormat .Date.Local}}
-
-#
-# String separator inserted between columns. When the column width specifier is
-# an exact number of characters, the separator is added to it (i.e. the exact
-# width will be fully available for the column contents).
-#
-# Default: "  "
-#column-separator="  "
-
-#
-# See time.Time#Format at https://godoc.org/time#Time.Format
-#
-# Default: 2006 Jan 02
-#timestamp-format=2006 Jan 02
-
-#
-# Index-only time format for messages that were received/sent today.
-# If this is empty, timestamp-format is used instead.
-#
-# Default: 15:04
-#this-day-time-format=15:04
-
-#
-# Index-only time format for messages that were received/sent within the last
-# 7 days. If this is empty, timestamp-format is used instead.
-#
-# Default: Jan 02
-#this-week-time-format=Jan 02
-
-#
-# Index-only time format for messages that were received/sent this year.
-# If this is empty, timestamp-format is used instead.
-#
-#Default: Jan 02
-#this-year-time-format=Jan 02
-
-#
-# Overrides timestamp-format for the message view.
-#
-# Default: 2006 Jan 02, 15:04 GMT-0700
-#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
-
-#
-# If set, overrides timestamp-format in the message view for messages
-# that were received/sent today.
-#
-#message-view-this-day-time-format=
-
-# If set, overrides timestamp-format in the message view for messages
-# that were received/sent within the last 7 days.
-#
-#message-view-this-week-time-format=
-
-#
-# If set, overrides *timestamp-format* in the message view for messages
-# that were received/sent this year.
-#
-#message-view-this-year-time-format=
-
-#
-# Width of the sidebar, including the border.
-#
-# Default: 22
-#sidebar-width=22
-
-#
-# Default split layout for message list tabs. The syntax is:
-#
-#       [<direction>] <size>
-#
-# <direction> is optional and defaults to horizontal. It can take one
-# of the following values: h, horiz, horizontal, v, vert, vertical.
-#
-# <size> is a positive integer representing the size (in terminal cells)
-# of the message list window.
-#
-#message-list-split=
-
-#
-# Message to display when viewing an empty folder.
-#
-# Default: (no messages)
-#empty-message=(no messages)
-
-# Message to display when no folders exists or are all filtered
-#
-# Default: (no folders)
-#empty-dirlist=(no folders)
-#
-# Value to set {{.Subject}} template to when subject is empty.
-#
-# Default: (no subject)
-#empty-subject=(no subject)
-
-# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
-#
-# Default: false
-mouse-enabled=true
-
-#
-# Ring the bell when new messages are received
-#
-# Default: true
-#new-message-bell=true
-
-#
-# Template to use for Account tab titles
-#
-# Default: {{.Account}}
-#tab-title-account={{.Account}}
-
-#
-# Template to use for Composer tab titles
-#
-# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
-#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
-
-#
-# Template to use for Message Viewer tab titles
-#
-# Default: {{.Subject}}
-#tab-title-viewer={{.Subject}}
-
-
-# Marker to show before a pinned tab's name.
-#
-# Default: `
-#pinned-tab-marker='`'
-
-# Template for the left side of the directory list.
-# See aerc-templates(7) for all available fields and functions.
-#
-# Default: {{.Folder}}
-#dirlist-left={{.Folder}}
-
-# Template for the right side of the directory list.
-# See aerc-templates(7) for all available fields and functions.
-#
-# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
-#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
-
-# Delay after which the messages are actually listed when entering a directory.
-# This avoids loading messages when skipping over folders and makes the UI more
-# responsive. If you do not want that, set it to 0s.
-#
-# Default: 200ms
-#dirlist-delay=200ms
-
-# Display the directory list as a foldable tree that allows to collapse and
-# expand the folders.
-#
-# Default: false
-#dirlist-tree=false
-
-# If dirlist-tree is enabled, set level at which folders are collapsed by
-# default. Set to 0 to disable.
-#
-# Default: 0
-#dirlist-collapse=0
-
-# List of space-separated criteria to sort the messages by, see *sort*
-# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
-# reverses that criterion.
-#
-# Example: "from -r date"
-#
-# sort=from -r date
-
-# Moves to next message when the current message is deleted
-#
-# Default: true
-#next-message-on-delete=true
-
-# Automatically set the "seen" flag when a message is opened in the message
-# viewer.
-#
-# Default: true
-#auto-mark-read=true
-
-# The directories where the stylesets are stored. It takes a colon-separated
-# list of directories. If this is unset or if a styleset cannot be found, the
-# following paths will be used as a fallback in that order:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
-#   /usr/local/share/aerc/stylesets
-#   /usr/share/aerc/stylesets
-#
-#stylesets-dirs=
-
-# Uncomment to use box-drawing characters for vertical and horizontal borders.
-#
-# Default: "│" and "─"
-#border-char-vertical="│"
-#border-char-horizontal="─"
-
-# Sets the styleset to use for the aerc ui elements.
-#
-# Default: default
-#styleset-name=default
-
-# Activates fuzzy search in commands and their arguments: the typed string is
-# searched in the command or option in any position, and need not be
-# consecutive characters in the command or option.
-#
-# Default: false
-#fuzzy-complete=false
-
-# How long to wait after the last input before auto-completion is triggered.
-#
-# Default: 250ms
-#completion-delay=250ms
-
-# The minimum required characters to allow auto-completion to be triggered after
-# completion-delay.
-#
-# Setting this to "manual" disables automatic completion, leaving only the
-# manually triggered completion with the $complete key (see aerc-binds(5) for
-# more details).
-#
-# Default: 1
-#completion-min-chars=1
-
-#
-# Global switch for completion popovers
-#
-# Default: true
-#completion-popovers=true
-
-# Uncomment to use UTF-8 symbols to indicate PGP status of messages
-#
-# Default: ASCII
-#icon-unencrypted=
-#icon-encrypted=✔
-#icon-signed=✔
-#icon-signed-encrypted=✔
-#icon-unknown=✘
-#icon-invalid=⚠
-
-# Reverses the order of the message list. By default, the message list is
-# ordered with the newest (highest UID) message on top. Reversing the order
-# will put the oldest (lowest UID) message on top. This can be useful in cases
-# where the backend does not support sorting.
-#
-# Default: false
-reverse-msglist-order = true
-
-# Reverse display of the message threads. Default order is the initial
-# message is on the top with all the replies being displayed below. The
-# reverse option will put the initial message at the bottom with the
-# replies on top.
-#
-# Default: false
-# reverse-thread-order=true
-
-# Positions the cursor on the last message in the message list (at the
-# bottom of the view) when opening a new folder.
-#
-# Default: false
-#select-last-message=false
-
-# Sort the thread siblings according to the sort criteria for the messages. If
-# sort-thread-siblings is false, the thread siblings will be sorted based on
-# the message UID in ascending order. This option is only applicable for
-# client-side threading with a backend that enables sorting. Note that there's
-# a performance impact when sorting is activated.
-#
-# Default: false
-#sort-thread-siblings=false
-
-# Set the scroll offset in number of lines from the top and bottom of the
-# message list.
-#
-# Default: 0
-#msglist-scroll-offset = 0
-
-#
-# Enable a threaded view of messages. If this is not supported by the backend
-# (IMAP server or notmuch), threads will be built by the client.
-#
-# Default: false
-threading-enabled=true
-
-# Force client-side thread building
-#
-# Default: false
-#force-client-threads=false
-
-# If no References nor In-Reply-To headers can be matched to build client side
-# threads, fallback to similar subjects.
-#
-# Default: false
-#threading-by-subject=false
-
-# Show thread context enables messages which do not match the current query (or
-# belong to the current mailbox) to be shown for context. These messages can be
-# styled separately using "msglist_thread_context" in a styleset. This feature
-# is not supported by all backends
-#
-# Default: false
-#show-thread-context=false
-
-# Debounce client-side thread building
-#
-# Default: 50ms
-#client-threads-delay=50ms
-
-#
-# Thread prefix customization:
-
-#
-# Customize the thread prefix appearance by selecting the arrow head.
-#
-# Default: ">"
-#thread-prefix-tip = ">"
-
-#
-# Customize the thread prefix appearance by selecting the arrow indentation.
-#
-# Default: " "
-#thread-prefix-indent = " "
-
-#
-# Customize the thread prefix appearance by selecting the vertical extension of
-# the arrow.
-#
-# Default: "│"
-#thread-prefix-stem = "│"
-
-#
-# Customize the thread prefix appearance by selecting the horizontal extension
-# of the arrow.
-#
-# Default: ""
-#thread-prefix-limb = ""
-
-#
-# Customize the thread prefix appearance by selecting the folded thread
-# indicator.
-#
-# Default: "+"
-#thread-prefix-folded = "+"
-
-#
-# Customize the thread prefix appearance by selecting the unfolded thread
-# indicator.
-#
-# Default: ""
-#thread-prefix-unfolded = ""
-
-#
-# Customize the thread prefix appearance by selecting the first child connector.
-#
-# Default: ""
-#thread-prefix-first-child = ""
-
-#
-# Customize the thread prefix appearance by selecting the connector used if
-# the message has siblings.
-#
-# Default: "├─"
-#thread-prefix-has-siblings = "├─"
-
-#
-# Customize the thread prefix appearance by selecting the connector used if the
-# message has no parents and no children.
-#
-# Default: ""
-#thread-prefix-lone = ""
-
-#
-# Customize the thread prefix appearance by selecting the connector used if the
-# message has no parents and has children.
-#
-# Default: ""
-#thread-prefix-orphan = ""
-
-#
-# Customize the thread prefix appearance by selecting the connector for the last
-# sibling.
-#
-# Default: "└─"
-#thread-prefix-last-sibling = "└─"
-
-#
-# Customize the reversed thread prefix appearance by selecting the connector for
-# the last sibling.
-#
-# Default: "┌─"
-#thread-prefix-last-sibling-reverse = "┌─"
-
-#
-# Customize the thread prefix appearance by selecting the connector for dummy
-# thread.
-#
-# Default: "┬─"
-#thread-prefix-dummy = "┬─"
-
-#
-# Customize the reversed thread prefix appearance by selecting the connector for
-# dummy thread.
-#
-# Default: "┴─"
-#thread-prefix-dummy-reverse = "┴─"
-
-#
-# Customize the reversed thread prefix appearance by selecting the first child
-# connector.
-#
-# Default: ""
-#thread-prefix-first-child-reverse = ""
-
-#
-# Customize the reversed thread prefix appearance by selecting the connector
-# used if the message has no parents and has children.
-#
-# Default: ""
-#thread-prefix-orphan-reverse = ""
-
-[statusline]
-#
-# Describes the format for the status line. This is a comma separated list of
-# column names with an optional align and width suffix. See [ui].index-columns
-# for more details. To completely mute the status line except for push
-# notifications, explicitly set status-columns to an empty string.
-#
-# Default: left<*,center:=,right>*
-#status-columns=left<*,center:=,right>*
-
-#
-# Each name in status-columns must have a corresponding column-$name setting.
-# All column-$name settings accept golang text/template syntax. See
-# aerc-templates(7) for available template attributes and functions.
-#
-# Default settings
-#column-left=[{{.Account}}] {{.StatusInfo}}
-#column-center={{.PendingKeys}}
-#column-right={{.TrayInfo}} | {{cwd}}
-
-#
-# String separator inserted between columns.
-# See [ui].column-separator for more details.
-#
-#column-separator=" "
-
-# Specifies the separator between grouped statusline elements.
-#
-# Default: " | "
-#separator=" | "
-
-# Defines the mode for displaying the status elements.
-# Options: text, icon
-#
-# Default: text
-#display-mode=text
-
-[viewer]
-#
-# Specifies the pager to use when displaying emails. Note that some filters
-# may add ANSI codes to add color to rendered emails, so you may want to use a
-# pager which supports ANSI codes.
-#
-# Default: less -Rc
-#pager=less -Rc
-
-#
-# If an email offers several versions (multipart), you can configure which
-# mimetype to prefer. For example, this can be used to prefer plaintext over
-# html emails.
-#
-# Default: text/plain,text/html
-#alternatives=text/plain,text/html
-
-#
-# Default setting to determine whether to show full headers or only parsed
-# ones in message viewer.
-#
-# Default: false
-#show-headers=false
-
-#
-# Layout of headers when viewing a message. To display multiple headers in the
-# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
-# none of their specified headers are present in the message.
-#
-# Default: From|To,Cc|Bcc,Date,Subject
-#header-layout=From|To,Cc|Bcc,Date,Subject
-
-# Whether to always show the mimetype of an email, even when it is just a single part
-#
-# Default: false
-#always-show-mime=false
-
-# Define the maximum height of the mimetype switcher before a scrollbar is used.
-# The height of the mimetype switcher is restricted to half of the display
-# height. If the provided value for the height is zero, the number of parts will
-# be used as the height of the type switcher.
-#
-# Default: 0
-#max-mime-height = 0
-
-# Parses and extracts http links when viewing a message. Links can then be
-# accessed with the open-link command.
-#
-# Default: true
-#parse-http-links=true
-
-[compose]
-#
-# Specifies the command to run the editor with. It will be shown in an embedded
-# terminal, though it may also launch a graphical window if the environment
-# supports it. Defaults to $EDITOR, or vi.
-#editor=
-
-#
-# When set, aerc will create and read .eml files for composing that have
-# non-standard \n linebreaks. This is only relevant if the used editor does not
-# support CRLF linebreaks.
-#
-#lf-editor=false
-
-#
-# Default header fields to display when composing a message. To display
-# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
-#
-# Default: To|From,Subject
-#header-layout=To|From,Subject
-
-#
-# Edit headers into the text editor instead than separate fields.
-#
-# When this is true, address-book-cmd is not supported and address completion
-# is left to the editor itself. Also, displaying multiple headers on the same
-# line is not possible.
-#
-# Default: false
-#edit-headers=false
-
-#
-# Specifies the command to be used to tab-complete email addresses. Any
-# occurrence of "%s" in the address-book-cmd will be replaced with what the
-# user has typed so far.
-#
-# The command must output the completions to standard output, one completion
-# per line. Each line must be tab-delimited, with an email address occurring as
-# the first field. Only the email address field is required. The second field,
-# if present, will be treated as the contact name. Additional fields are
-# ignored.
-#
-# This parameter can also be set per account in accounts.conf.
-# address-book-cmd=
-# address-book-cmd=emailbook /home/tonitch/.cache/emailbook --search "%s"
-# address-book-cmd=carddav-query %s
-address-book-cmd=khard email --parsable --search-in-source-files --remove-first-line %s
-
-# Specifies the command to be used to select attachments. Any occurrence of
-# '%s' in the file-picker-cmd will be replaced with the argument <arg>
-# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
-# location of a temporary file, from which aerc will read the selected files.
-#
-# If '%f' is not present, the command must output the selected files to
-# standard output, one file per line. If it is present, then aerc does not
-# capture the standard output and instead reads the files from the temporary
-# file which should have the same format.
-#file-picker-cmd=
-
-#
-# Allow to address yourself when replying
-#
-# Default: true
-#reply-to-self=true
-
-# Warn before sending an email with an empty subject.
-#
-# Default: false
-#empty-subject-warning=false
-
-#
-# Warn before sending an email that matches the specified regexp but does not
-# have any attachments. Leave empty to disable this feature.
-#
-# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
-# "(?im)" flags are set by default (case-insensitive and multi-line).
-#
-# Example:
-# no-attachment-warning=^[^>]*attach(ed|ment)
-#
-#no-attachment-warning=
-
-#
-# When set, aerc will generate "format=flowed" bodies with a content type of
-# "text/plain; format=flowed" as described in RFC3676. This format is easier to
-# handle for some mailing software, and generally just looks like ordinary
-# text. To actually make use of this format's features, you'll need support in
-# your editor.
-#
-#format-flowed=false
-
-[multipart-converters]
-#
-# Converters allow to generate multipart/alternative messages by converting the
-# main text/plain part into any other MIME type. Only exact MIME types are
-# accepted. The commands are invoked with sh -c and are expected to output
-# valid UTF-8 text.
-#
-# Example (obviously, this requires that you write your main text/plain body
-# using the markdown syntax):
-# text/html=pandoc -f markdown -t html --standalone
-
-[filters]
-#
-# Filters allow you to pipe an email body through a shell command to render
-# certain emails differently, e.g. highlighting them with ANSI escape codes.
-#
-# The commands are invoked with sh -c. The following folders are prepended to
-# the system $PATH to allow referencing filters from their name only:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
-#   ~/.local/libexec/aerc/filters
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
-#   $PREFIX/libexec/aerc/filters
-#   $PREFIX/share/aerc/filters
-#   /usr/libexec/aerc/filters
-#   /usr/share/aerc/filters
-#
-# If you want to run a program in your default $PATH which has the same name
-# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
-#
-# The following variables are defined in the filter command environment:
-#
-#   AERC_MIME_TYPE      the part MIME type/subtype
-#   AERC_FORMAT         the part content type format= parameter
-#   AERC_FILENAME       the attachment filename (if any)
-#   AERC_SUBJECT        the message Subject header value
-#   AERC_FROM           the message From header value
-#
-# The first filter which matches the email's mimetype will be used, so order
-# them from most to least specific.
-#
-# You can also match on non-mimetypes, by prefixing with the header to match
-# against (non-case-sensitive) and a comma, e.g. subject,text will match a
-# subject which contains "text". Use header,~regex to match against a regex.
-#
-text/plain=colorize
-text/calendar=calendar
-message/delivery-status=colorize
-message/rfc822=colorize
-text/html=pandoc -f html -t plain | colorize
-#text/html=html | colorize
-#text/*=bat -fP --file-name="$AERC_FILENAME"
-#application/x-sh=bat -fP -l sh
-image/*=catimg -w $(tput cols) -
-#subject,~Git(hub|lab)=lolcat -f
-#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
-
-# This special filter is only used to post-process email headers when
-# [viewer].show-headers=true
-# By default, headers are piped directly into the pager.
-#
-.headers=colorize
-
-[openers]
-#
-# Openers allow you to specify the command to use for the :open and :open-link
-# actions on a per-MIME-type basis. The :open-link URL scheme is used to
-# determine the MIME type as follows: x-scheme-handler/<scheme>.
-#
-# {} is expanded as the temporary filename or URL to be opened with proper
-# shell quoting. If it is not encountered in the command, the filename/URL will
-# be appended to the end of the command. The command will then be executed with
-# `sh -c`.
-#
-# Like [filters], openers support basic shell globbing. The first opener which
-# matches the part's MIME type (or URL scheme handler MIME type) will be used,
-# so order them from most to least specific.
-#
-# Examples:
-# x-scheme-handler/irc=hexchat
-# x-scheme-handler/http*=printf '%s' {} | wl-copy
-# text/html=surf -dfgms
-# text/plain=gvim {} +125
-# message/rfc822=thunderbird
-
-[hooks]
-#
-# Hooks are triggered whenever the associated event occurs.
-
-#
-# Executed when a new email arrives in the selected folder
-mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
-
-#
-# Executed when mail is deleted from a folder
-#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
-
-#
-# Executed when aerc adds mail to a folder
-#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
-
-#
-# Executed when aerc starts
-#aerc-startup=aerc :terminal calcurse && aerc :next-tab
-aerc-startup=aerc :terminal khal interactive && aerc :next-tab
-
-#
-# Executed when aerc shuts down.
-#aerc-shutdown=
-
-#
-# Executed when notmuch tags are modified.
-#tag-modified=
-
-#
-# Executed when flags are changed on a message.
-#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
-
-[templates]
-# Templates are used to populate email bodies automatically.
-#
-
-# The directories where the templates are stored. It takes a colon-separated
-# list of directories. If this is unset or if a template cannot be found, the
-# following paths will be used as a fallback in that order:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
-#   /usr/local/share/aerc/templates
-#   /usr/share/aerc/templates
-#
-# template-dirs=/home/tonitch/Documents/cpumons/pulls/mails/
-
-# The default template to be used for new messages.
-#
-# default: new_message
-#new-message=new_message
-
-# The default template to be used for quoted replies.
-#
-# default: quoted_reply
-#quoted-reply=quoted_reply
-
-# The default template to be used for forward as body.
-#
-# default: forward_as_body
-#forwards=forward_as_body

aerc/.config/aerc/binds.conf

@@ -1,186 +0,0 @@
-# Binds are of the form <key sequence> = <command to run>
-# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
-# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
-<C-p> = :prev-tab<Enter>
-<C-PgUp> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-<C-PgDn> = :next-tab<Enter>
-\[t = :prev-tab<Enter>
-\]t = :next-tab<Enter>
-<C-t> = :term<Enter>
-? = :help keys<Enter>
-<C-c> = :prompt 'Quit?' quit<Enter>
-<C-q> = :prompt 'Quit?' quit<Enter>
-<C-z> = :suspend<Enter>
-
-[messages]
-q = :prompt 'Quit?' quit<Enter>
-
-j = :next<Enter>
-<Down> = :next<Enter>
-<C-d> = :next 50%<Enter>
-<C-f> = :next 100%<Enter>
-<PgDn> = :next 100%<Enter>
-
-k = :prev<Enter>
-<Up> = :prev<Enter>
-<C-u> = :prev 50%<Enter>
-<C-b> = :prev 100%<Enter>
-<PgUp> = :prev 100%<Enter>
-g = :select 0<Enter>
-G = :select -1<Enter>
-
-J = :next-folder<Enter>
-<C-Down> = :next-folder<Enter>
-K = :prev-folder<Enter>
-<C-Up> = :prev-folder<Enter>
-H = :collapse-folder<Enter>
-<C-Left> = :collapse-folder<Enter>
-L = :expand-folder<Enter>
-<C-Right> = :expand-folder<Enter>
-
-v = :mark -t<Enter>
-<Space> = :mark -t<Enter>:next<Enter>
-V = :mark -v<Enter>
-
-T = :toggle-threads<Enter>
-zc = :fold<Enter>
-zo = :unfold<Enter>
-za = :fold -t<Enter>
-zM = :fold -a<Enter>
-zR = :unfold -a<Enter>
-<tab> = :fold -t<Enter>
-
-zz = :align center<Enter>
-zt = :align top<Enter>
-zb = :align bottom<Enter>
-
-<Enter> = :view<Enter>
-d = :choose -o y 'Really delete this message' delete-message<Enter>
-D = :delete<Enter>
-a = :archive flat<Enter>
-A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
-
-C = :compose<Enter>
-m = :compose<Enter>
-
-b = :bounce<space>
-
-rr = :reply -a<Enter>
-rq = :reply -aq<Enter>
-Rr = :reply<Enter>
-Rq = :reply -q<Enter>
-
-c = :cf<space>
-$ = :term<space>
-! = :term<space>
-| = :pipe<space>
-
-/ = :search<space>
-\ = :filter<space>
-n = :next-result<Enter>
-N = :prev-result<Enter>
-<Esc> = :clear<Enter>
-
-s = :split<Enter>
-S = :vsplit<Enter>
-
-pl = :patch list<Enter>
-pa = :patch apply <Tab>
-pd = :patch drop <Tab>
-pb = :patch rebase<Enter>
-pt = :patch term<Enter>
-ps = :patch switch <Tab>
-
-[messages:folder=Drafts]
-<Enter> = :recall<Enter>
-
-[view]
-/ = :toggle-key-passthrough<Enter>/
-q = :close<Enter>
-O = :open<Enter>
-o = :open<Enter>
-S = :save<space>
-| = :pipe<space>
-D = :delete<Enter>
-#A = :archive flat<Enter>
-A = :archive flat<Enter>:close<Enter>
-
-<C-l> = :open-link <space>
-
-f = :forward<Enter>
-rr = :reply -a<Enter>
-rq = :reply -aq<Enter>
-Rr = :reply<Enter>
-Rq = :reply -q<Enter>
-
-H = :toggle-headers<Enter>
-<C-k> = :prev-part<Enter>
-<C-Up> = :prev-part<Enter>
-<C-j> = :next-part<Enter>
-<C-Down> = :next-part<Enter>
-J = :next<Enter>
-<C-Right> = :next<Enter>
-K = :prev<Enter>
-<C-Left> = :prev<Enter>
-aa = :pipe -m khard add-email -f<Enter>
-
-[view::passthrough]
-$noinherit = true
-$ex = <C-x>
-<Esc> = :toggle-key-passthrough<Enter>
-
-[compose]
-# Keybindings used when the embedded terminal is not selected in the compose
-# view
-$noinherit = true
-$ex = <C-x>
-$complete = <C-o>
-<C-k> = :prev-field<Enter>
-<C-Up> = :prev-field<Enter>
-<C-j> = :next-field<Enter>
-<C-Down> = :next-field<Enter>
-<A-p> = :switch-account -p<Enter>
-<C-Left> = :switch-account -p<Enter>
-<A-n> = :switch-account -n<Enter>
-<C-Right> = :switch-account -n<Enter>
-<tab> = :next-field<Enter>
-<backtab> = :prev-field<Enter>
-<C-p> = :prev-tab<Enter>
-<C-PgUp> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-<C-PgDn> = :next-tab<Enter>
-
-[compose::editor]
-# Keybindings used when the embedded terminal is selected in the compose view
-$noinherit = true
-$ex = <C-x>
-<C-k> = :prev-field<Enter>
-<C-Up> = :prev-field<Enter>
-<C-j> = :next-field<Enter>
-<C-Down> = :next-field<Enter>
-<C-p> = :prev-tab<Enter>
-<C-PgUp> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-<C-PgDn> = :next-tab<Enter>
-
-[compose::review]
-# Keybindings used when reviewing a message to be sent
-# Inline comments are used as descriptions on the review screen
-y = :send<Enter> # Send
-n = :abort<Enter> # Abort (discard message, no confirmation)
-v = :preview<Enter> # Preview message
-p = :postpone<Enter> # Postpone
-q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone
-e = :edit<Enter> # Edit
-a = :attach<space> # Add attachment
-d = :detach<space> # Remove attachment
-
-[terminal]
-$noinherit = true
-$ex = <C-x>
-
-<C-p> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-<C-PgUp> = :prev-tab<Enter>
-<C-PgDn> = :next-tab<Enter>

aerc/.config/aerc/mutt_oauth2.py

@@ -1,422 +0,0 @@
-#!/usr/bin/env python3
-#
-# Mutt OAuth2 token management script, version 2020-08-07
-# Written against python 3.7.3, not tried with earlier python versions.
-#
-#   Copyright (C) 2020 Alexander Perlis
-#
-#   This program is free software; you can redistribute it and/or
-#   modify it under the terms of the GNU General Public License as
-#   published by the Free Software Foundation; either version 2 of the
-#   License, or (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-#   General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program; if not, write to the Free Software
-#   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-#   02110-1301, USA.
-'''Mutt OAuth2 token management'''
-
-import sys
-import json
-import argparse
-import urllib.parse
-import urllib.request
-import imaplib
-import poplib
-import smtplib
-import base64
-import secrets
-import hashlib
-import time
-from datetime import timedelta, datetime
-from pathlib import Path
-import socket
-import http.server
-import subprocess
-import readline
-
-# The token file must be encrypted because it contains multi-use bearer tokens
-# whose usage does not require additional verification. Specify whichever
-# encryption and decryption pipes you prefer. They should read from standard
-# input and write to standard output. The example values here invoke GPG,
-# although won't work until an appropriate identity appears in the first line.
-ENCRYPTION_PIPE = ['gpg', '--encrypt', '--recipient', 'debucquoy.anthony@gmail.com']
-DECRYPTION_PIPE = ['gpg', '--decrypt']
-
-registrations = {
-    'google': {
-        'authorize_endpoint': 'https://accounts.google.com/o/oauth2/auth',
-        'devicecode_endpoint': 'https://oauth2.googleapis.com/device/code',
-        'token_endpoint': 'https://accounts.google.com/o/oauth2/token',
-        'redirect_uri': 'urn:ietf:wg:oauth:2.0:oob',
-        'imap_endpoint': 'imap.gmail.com',
-        'pop_endpoint': 'pop.gmail.com',
-        'smtp_endpoint': 'smtp.gmail.com',
-        'sasl_method': 'OAUTHBEARER',
-        'scope': 'https://mail.google.com/',
-        'client_id': '',
-        'client_secret': '',
-    },
-    'microsoft': {
-        'authorize_endpoint': 'https://login.microsoftonline.com/common/oauth2/v2.0/authorize',
-        'devicecode_endpoint': 'https://login.microsoftonline.com/common/oauth2/v2.0/devicecode',
-        'token_endpoint': 'https://login.microsoftonline.com/common/oauth2/v2.0/token',
-        # 'redirect_uri': 'https://login.microsoftonline.com/common/oauth2/nativeclient',
-        'redirect_uri': 'https://localhost',
-        'tenant': 'common',
-        'imap_endpoint': 'outlook.office365.com',
-        'pop_endpoint': 'outlook.office365.com',
-        'smtp_endpoint': 'smtp.office365.com',
-        'sasl_method': 'XOAUTH2',
-        'scope': ('offline_access https://outlook.office.com/IMAP.AccessAsUser.All '
-                  'https://outlook.office.com/POP.AccessAsUser.All '
-                  'https://outlook.office.com/SMTP.Send'),
-        'client_id': '9e5f94bc-e8a4-4e73-b8be-63364c29d753',
-        'client_secret': '',
-    },
-}
-
-ap = argparse.ArgumentParser(epilog='''
-This script obtains and prints a valid OAuth2 access token.  State is maintained in an
-encrypted TOKENFILE.  Run with "--verbose --authorize" to get started or whenever all
-tokens have expired, optionally with "--authflow" to override the default authorization
-flow.  To truly start over from scratch, first delete TOKENFILE.  Use "--verbose --test"
-to test the IMAP/POP/SMTP endpoints.
-''')
-ap.add_argument('-v', '--verbose', action='store_true', help='increase verbosity')
-ap.add_argument('-d', '--debug', action='store_true', help='enable debug output')
-ap.add_argument('tokenfile', help='persistent token storage')
-ap.add_argument('-a', '--authorize', action='store_true', help='manually authorize new tokens')
-ap.add_argument('--authflow', help='authcode | localhostauthcode | devicecode')
-ap.add_argument('-t', '--test', action='store_true', help='test IMAP/POP/SMTP endpoints')
-args = ap.parse_args()
-
-token = {}
-path = Path(args.tokenfile)
-if path.exists():
-    if 0o777 & path.stat().st_mode != 0o600:
-        sys.exit('Token file has unsafe mode. Suggest deleting and starting over.')
-    try:
-        sub = subprocess.run(DECRYPTION_PIPE, check=True, input=path.read_bytes(),
-                             capture_output=True)
-        token = json.loads(sub.stdout)
-    except subprocess.CalledProcessError:
-        sys.exit('Difficulty decrypting token file. Is your decryption agent primed for '
-                 'non-interactive usage, or an appropriate environment variable such as '
-                 'GPG_TTY set to allow interactive agent usage from inside a pipe?')
-
-
-def writetokenfile():
-    '''Writes global token dictionary into token file.'''
-    if not path.exists():
-        path.touch(mode=0o600)
-    if 0o777 & path.stat().st_mode != 0o600:
-        sys.exit('Token file has unsafe mode. Suggest deleting and starting over.')
-    sub2 = subprocess.run(ENCRYPTION_PIPE, check=True, input=json.dumps(token).encode(),
-                          capture_output=True)
-    path.write_bytes(sub2.stdout)
-
-
-if args.debug:
-    print('Obtained from token file:', json.dumps(token))
-if not token:
-    if not args.authorize:
-        sys.exit('You must run script with "--authorize" at least once.')
-    print('Available app and endpoint registrations:', *registrations)
-    token['registration'] = input('OAuth2 registration: ')
-    token['authflow'] = input('Preferred OAuth2 flow ("authcode" or "localhostauthcode" '
-                              'or "devicecode"): ')
-    token['email'] = input('Account e-mail address: ')
-    token['access_token'] = ''
-    token['access_token_expiration'] = ''
-    token['refresh_token'] = ''
-    writetokenfile()
-
-if token['registration'] not in registrations:
-    sys.exit(f'ERROR: Unknown registration "{token["registration"]}". Delete token file '
-             f'and start over.')
-registration = registrations[token['registration']]
-
-authflow = token['authflow']
-if args.authflow:
-    authflow = args.authflow
-
-baseparams = {'client_id': registration['client_id']}
-# Microsoft uses 'tenant' but Google does not
-if 'tenant' in registration:
-    baseparams['tenant'] = registration['tenant']
-
-
-def access_token_valid():
-    '''Returns True when stored access token exists and is still valid at this time.'''
-    token_exp = token['access_token_expiration']
-    return token_exp and datetime.now() < datetime.fromisoformat(token_exp)
-
-
-def update_tokens(r):
-    '''Takes a response dictionary, extracts tokens out of it, and updates token file.'''
-    token['access_token'] = r['access_token']
-    token['access_token_expiration'] = (datetime.now() +
-                                        timedelta(seconds=int(r['expires_in']))).isoformat()
-    if 'refresh_token' in r:
-        token['refresh_token'] = r['refresh_token']
-    writetokenfile()
-    if args.verbose:
-        print(f'NOTICE: Obtained new access token, expires {token["access_token_expiration"]}.')
-
-
-if args.authorize:
-    p = baseparams.copy()
-    p['scope'] = registration['scope']
-
-    if authflow in ('authcode', 'localhostauthcode'):
-        verifier = secrets.token_urlsafe(90)
-        challenge = base64.urlsafe_b64encode(hashlib.sha256(verifier.encode()).digest())[:-1]
-        redirect_uri = registration['redirect_uri']
-        listen_port = 0
-        if authflow == 'localhostauthcode':
-            # Find an available port to listen on
-            s = socket.socket()
-            s.bind(('127.0.0.1', 0))
-            listen_port = s.getsockname()[1]
-            s.close()
-            redirect_uri = 'http://localhost:'+str(listen_port)+'/'
-            # Probably should edit the port number into the actual redirect URL.
-
-        p.update({'login_hint': token['email'],
-                  'response_type': 'code',
-                  'redirect_uri': redirect_uri,
-                  'code_challenge': challenge,
-                  'code_challenge_method': 'S256'})
-        print(registration["authorize_endpoint"] + '?' +
-              urllib.parse.urlencode(p, quote_via=urllib.parse.quote))
-
-        authcode = ''
-        if authflow == 'authcode':
-            authcode = input('Visit displayed URL to retrieve authorization code. Enter '
-                             'code from server (might be in browser address bar): ')
-        else:
-            print('Visit displayed URL to authorize this application. Waiting...',
-                  end='', flush=True)
-
-            class MyHandler(http.server.BaseHTTPRequestHandler):
-                '''Handles the browser query resulting from redirect to redirect_uri.'''
-
-                # pylint: disable=C0103
-                def do_HEAD(self):
-                    '''Response to a HEAD requests.'''
-                    self.send_response(200)
-                    self.send_header('Content-type', 'text/html')
-                    self.end_headers()
-
-                def do_GET(self):
-                    '''For GET request, extract code parameter from URL.'''
-                    # pylint: disable=W0603
-                    global authcode
-                    querystring = urllib.parse.urlparse(self.path).query
-                    querydict = urllib.parse.parse_qs(querystring)
-                    if 'code' in querydict:
-                        authcode = querydict['code'][0]
-                    self.do_HEAD()
-                    self.wfile.write(b'<html><head><title>Authorizaton result</title></head>')
-                    self.wfile.write(b'<body><p>Authorization redirect completed. You may '
-                                     b'close this window.</p></body></html>')
-            with http.server.HTTPServer(('127.0.0.1', listen_port), MyHandler) as httpd:
-                try:
-                    httpd.handle_request()
-                except KeyboardInterrupt:
-                    pass
-
-        if not authcode:
-            sys.exit('Did not obtain an authcode.')
-
-        for k in 'response_type', 'login_hint', 'code_challenge', 'code_challenge_method':
-            del p[k]
-        p.update({'grant_type': 'authorization_code',
-                  'code': authcode,
-                  'client_secret': registration['client_secret'],
-                  'code_verifier': verifier})
-        print('Exchanging the authorization code for an access token')
-        try:
-            response = urllib.request.urlopen(registration['token_endpoint'],
-                                              urllib.parse.urlencode(p).encode())
-        except urllib.error.HTTPError as err:
-            print(err.code, err.reason)
-            response = err
-        response = response.read()
-        if args.debug:
-            print(response)
-        response = json.loads(response)
-        if 'error' in response:
-            print(response['error'])
-            if 'error_description' in response:
-                print(response['error_description'])
-            sys.exit(1)
-
-    elif authflow == 'devicecode':
-        try:
-            response = urllib.request.urlopen(registration['devicecode_endpoint'],
-                                              urllib.parse.urlencode(p).encode())
-        except urllib.error.HTTPError as err:
-            print(err.code, err.reason)
-            response = err
-        response = response.read()
-        if args.debug:
-            print(response)
-        response = json.loads(response)
-        if 'error' in response:
-            print(response['error'])
-            if 'error_description' in response:
-                print(response['error_description'])
-            sys.exit(1)
-        print(response['message'])
-        del p['scope']
-        p.update({'grant_type': 'urn:ietf:params:oauth:grant-type:device_code',
-                  'client_secret': registration['client_secret'],
-                  'device_code': response['device_code']})
-        interval = int(response['interval'])
-        print('Polling...', end='', flush=True)
-        while True:
-            time.sleep(interval)
-            print('.', end='', flush=True)
-            try:
-                response = urllib.request.urlopen(registration['token_endpoint'],
-                                                  urllib.parse.urlencode(p).encode())
-            except urllib.error.HTTPError as err:
-                # Not actually always an error, might just mean "keep trying..."
-                response = err
-            response = response.read()
-            if args.debug:
-                print(response)
-            response = json.loads(response)
-            if 'error' not in response:
-                break
-            if response['error'] == 'authorization_declined':
-                print(' user declined authorization.')
-                sys.exit(1)
-            if response['error'] == 'expired_token':
-                print(' too much time has elapsed.')
-                sys.exit(1)
-            if response['error'] != 'authorization_pending':
-                print(response['error'])
-                if 'error_description' in response:
-                    print(response['error_description'])
-                sys.exit(1)
-        print()
-
-    else:
-        sys.exit(f'ERROR: Unknown OAuth2 flow "{token["authflow"]}. Delete token file and '
-                 f'start over.')
-
-    update_tokens(response)
-
-
-if not access_token_valid():
-    if args.verbose:
-        print('NOTICE: Invalid or expired access token; using refresh token '
-              'to obtain new access token.')
-    if not token['refresh_token']:
-        sys.exit('ERROR: No refresh token. Run script with "--authorize".')
-    p = baseparams.copy()
-    p.update({'client_secret': registration['client_secret'],
-              'refresh_token': token['refresh_token'],
-              'grant_type': 'refresh_token'})
-    try:
-        response = urllib.request.urlopen(registration['token_endpoint'],
-                                          urllib.parse.urlencode(p).encode())
-    except urllib.error.HTTPError as err:
-        print(err.code, err.reason)
-        response = err
-    response = response.read()
-    if args.debug:
-        print(response)
-    response = json.loads(response)
-    if 'error' in response:
-        print(response['error'])
-        if 'error_description' in response:
-            print(response['error_description'])
-        print('Perhaps refresh token invalid. Try running once with "--authorize"')
-        sys.exit(1)
-    update_tokens(response)
-
-
-if not access_token_valid():
-    sys.exit('ERROR: No valid access token. This should not be able to happen.')
-
-
-if args.verbose:
-    print('Access Token: ', end='')
-print(token['access_token'])
-
-
-def build_sasl_string(user, host, port, bearer_token):
-    '''Build appropriate SASL string, which depends on cloud server's supported SASL method.'''
-    if registration['sasl_method'] == 'OAUTHBEARER':
-        return f'n,a={user},\1host={host}\1port={port}\1auth=Bearer {bearer_token}\1\1'
-    if registration['sasl_method'] == 'XOAUTH2':
-        return f'user={user}\1auth=Bearer {bearer_token}\1\1'
-    sys.exit(f'Unknown SASL method {registration["sasl_method"]}.')
-
-
-if args.test:
-    errors = False
-
-    imap_conn = imaplib.IMAP4_SSL(registration['imap_endpoint'])
-    sasl_string = build_sasl_string(token['email'], registration['imap_endpoint'], 993,
-                                    token['access_token'])
-    if args.debug:
-        imap_conn.debug = 4
-    try:
-        imap_conn.authenticate(registration['sasl_method'], lambda _: sasl_string.encode())
-        # Microsoft has a bug wherein a mismatch between username and token can still report a
-        # successful login... (Try a consumer login with the token from a work/school account.)
-        # Fortunately subsequent commands fail with an error. Thus we follow AUTH with another
-        # IMAP command before reporting success.
-        imap_conn.list()
-        if args.verbose:
-            print('IMAP authentication succeeded')
-    except imaplib.IMAP4.error as e:
-        print('IMAP authentication FAILED (does your account allow IMAP?):', e)
-        errors = True
-
-    pop_conn = poplib.POP3_SSL(registration['pop_endpoint'])
-    sasl_string = build_sasl_string(token['email'], registration['pop_endpoint'], 995,
-                                    token['access_token'])
-    if args.debug:
-        pop_conn.set_debuglevel(2)
-    try:
-        # poplib doesn't have an auth command taking an authenticator object
-        # Microsoft requires a two-line SASL for POP
-        # pylint: disable=W0212
-        pop_conn._shortcmd('AUTH ' + registration['sasl_method'])
-        pop_conn._shortcmd(base64.standard_b64encode(sasl_string.encode()).decode())
-        if args.verbose:
-            print('POP authentication succeeded')
-    except poplib.error_proto as e:
-        print('POP authentication FAILED (does your account allow POP?):', e.args[0].decode())
-        errors = True
-
-    # SMTP_SSL would be simpler but Microsoft does not answer on port 465.
-    smtp_conn = smtplib.SMTP(registration['smtp_endpoint'], 587)
-    sasl_string = build_sasl_string(token['email'], registration['smtp_endpoint'], 587,
-                                    token['access_token'])
-    smtp_conn.ehlo('test')
-    smtp_conn.starttls()
-    smtp_conn.ehlo('test')
-    if args.debug:
-        smtp_conn.set_debuglevel(2)
-    try:
-        smtp_conn.auth(registration['sasl_method'], lambda _=None: sasl_string)
-        if args.verbose:
-            print('SMTP authentication succeeded')
-    except smtplib.SMTPAuthenticationError as e:
-        print('SMTP authentication FAILED:', e)
-        errors = True
-
-    if errors:
-        sys.exit(1)

aerc/.config/aerc/templates/quoted_reply

@@ -1,18 +0,0 @@
-{{ if or
-	(eq .OriginalMIMEType "text/html")
-	(contains (toLower .OriginalText) "<html")
-}}
-	{{- $text := exec `/usr/lib/aerc/filters/html` .OriginalText | replace `\r` `` -}}
-	{{- range split "\n" $text -}}
-		{{- if eq . "References:" }}{{break}}{{end}}
-		{{- if or
-			(eq (len .) 0)
-			(match `^\[.+\]\s*$` .)
-		}}{{continue}}{{end}}
-		{{- printf "%s\n" . | replace `^[\s]+` "" | quote}}
-	{{- end -}}
-{{- else }}
-	{{- trimSignature .OriginalText | quote -}}
-{{- end -}}
-
-{{.Signature -}}

bin/.bin/0x0

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-curl -F"file=@$@" https://0x0.st | tee >(xclip -sel clip)
-

bin/.bin/disc

@@ -1,8 +0,0 @@
-#!/bin/sh
-
-tmux ls -F \#S | grep disc && \
-	tmux attach -t disc \
-|| \
-	tmux new-session -s disc 'scli --save-history' \; \
-		split-window -h -l 75% 'aerc' \; \
-		split-window -v 'weechat' \; \

bin/.bin/emailbook

@@ -1,141 +0,0 @@
-#!/bin/sh
-VERSION="0.2.1"
-usage() {
-    echo "emailbook $VERSION"'
-A minimalistic address book for e-mails only.
-
-Usage: emailbook FILE [OPTIONS]
-
-Prints all values in FILE if no option is given.
-
-Options:
--a, --add [KEY] VALUE  Add KEY/VALUE pair to FILE. If KEY is omitted,
-                       VALUE is used as key, too.
-[-s, --search] QUERY   Search FILE for entries with keys or values containing QUERY.
--k, --key QUERY        Like `--search` but limit search to keys/aliases.
--v, --value QUERY      Like `--search` but limit search to values.
--p, --parse SOURCE     Parse stdin for e-mail addresses in header and add them to FILE.
-                       SOURCE might be either --from, --to , --cc, --bcc, or --all.
--h, --help             Show this help.
--V, --version          Print version.
-'
-}
-
-checkfilename() {
-    [ $QUIET ] || [ -e "$filename" ] \
-        || echo "File $filename not found. Creating it." 1>&2
-}
-
-keyexists() {
-    escaped=$(echo "$*" | sed 's/[][\.|$(){}?+*^]/\\&/g')
-    # also check display name with/without double quotes
-    quotestoggled=$(echo "$*" | sed -E 's/^"([^"]+)"( +<[^>]+>)/\1\2/;t;s/^([^"]+?)( +<[^>]+>)/"\1"\2/')
-    quotestoggledescaped=$(echo "$quotestoggled" | sed 's/[][\.|$(){}?+*^]/\\&/g')
-    grep -q -E "^$escaped( :|\$)" "$filename" 2> /dev/null \
-        || grep -q -E "^$quotestoggledescaped( :|\$)" "$filename" 2> /dev/null
-}
-
-addentry() {
-    if keyexists "$1"; then
-        [ $QUIET ] || echo "! $1 (skipped)"
-    else
-        [ "$2" ] && line="$1 : $2" || line="$1"
-        [ $QUIET ] || echo "+ $line"
-        echo "$line" >> "$filename"
-    fi
-}
-
-add() {
-    checkfilename
-    case $# in
-    1|2) addentry "$@" ;;
-    *) echo "Expected one or two arguments after -a!"; exit 1 ;;
-    esac
-}
-
-addfromstdin() {
-    # Skip lines without "@", skip lines containing no-reply (or similar),
-    # strip \r, strip leading spaces, do the following replacements:
-    # "'John Doe'" <xxx> → "John Doe" <xxx>
-    # 'John Doe' <xxx> → John Doe <xxx>
-    # "john.doe@example.com" <john.doe@example.com> → <john.doe@example.com>
-    # "<john.doe@example.com>" <john.doe@example.com> → <john.doe@example.com>
-    # john.doe@example.com → <john.doe@example.com>
-    grep '@' \
-        | grep -v -i -E '\bnot?[_-]?reply' \
-        | sed 's/\r$//' \
-        | sed -E 's/^ +//g' \
-        | sed -E "s/(\"?)'([^'\"]+)'(\"?)/\1\2\3/" \
-        | sed -E 's/^"<?([^">]*)>?" +<\1>/<\1>/' \
-        | sed -E 's/^[^<>@ ]*@[^<>@ ]+$/<\0>/' \
-        | sort -u \
-        | while read -r line; do addentry "$line"; done
-}
-
-searchall() {
-    # show entries with matching alias first
-    searchbyalias "$*"
-    searchbyvalueonly "$*"
-}
-
-searchbyalias() {
-    grep -i -E "$* :" "$filename" | sed -E 's/^[^:]+:\s*//'
-}
-
-searchbyvalue() {
-    sed -E 's/^[^:]+:\s*//' "$filename" | grep -i -E "$*"
-}
-
-searchbyvalueonly() {
-    # exclude matches found by searchbyalias
-    grep -i -E -v "$* :" "$filename" | sed -E 's/^[^:]+:\s*//' | grep -i -E "$*"
-}
-
-parsefields() {
-    # Find header fields starting with $1 (p.e. 'To:') plus following lines
-    # starting with a space. Split entries at commas except when quoted. Skip
-    # empty lines. Decode encoded strings. Squeeze double spaces.
-    sed -E '/^\r?$/Q' - \
-        | sed -E -n "/^$1:/{:a ; \$!N ; s/\n\s+/ / ; ta ; P ; D}" \
-        | sed -E "s/^$1:\\s*//" \
-        | grep -v -P '[\x80-\xFF]' \
-        | awk -vFPAT='([^,"]*)("[^"]+")?([^,]*)?' -vOFS='\n' \
-          '{for(i=1;i<=NF;i++) printf("%s\n",$i)}' \
-        | sed -E -e '/^ *$/d' \
-        | perl -CS -MEncode -ne 'print decode("MIME-Header", $_)' \
-        | sed -E -e 's/  +/ /g' \
-        | addfromstdin
-}
-
-parse() {
-    checkfilename
-    case "$1" in
-    --all)  parsefields '(From|To|Cc|CC|Bcc)' ;;
-    # TODO: Include References, In-Reply-To, Reply-To, Return-Path?
-    --from) parsefields 'From' ;;
-    --to)   parsefields 'To' ;;
-    --cc)   parsefields '(Cc|CC)' ;;
-    --bcc)  parsefields 'Bcc' ;;
-    esac
-}
-
-
-case "$1" in
--h|--help|'') usage; exit ;;
--V|--version) echo "$VERSION"; exit ;;
-esac
-
-filename="$1"; shift
-
-case "$1" in
--q|--quiet) shift; QUIET=1 ;;
-esac
-
-case "$1" in
--a|--add)     shift; add "$@" ;;
--s|--search)  shift; searchall "$*" ;;
--k|--key)     shift; searchbyalias "$*" ;;
--v|--value)   shift; searchbyvalue "$*" ;;
--p|--parse)   shift; parse "$@" ;;
-*)            searchall "$*" ;;
-esac

conky/.config/conky/conky.conf

@@ -1,168 +0,0 @@
--- Conky, a system monitor https://github.com/brndnmtthws/conky
---
--- This configuration file is Lua code. You can write code in here, and it will
--- execute when Conky loads. You can use it to generate your own advanced
--- configurations.
---
--- Try this (remove the `--`):
---
---   print("Loading Conky config")
---
--- For more on Lua, see:
--- https://www.lua.org/pil/contents.html
---
--- Conky Lua API: https://conky.cc/lua
-
--- Configuration settings: https://conky.cc/config_settings
-
-io.input("/etc/hostname")
-hostname = io.read()
-
-conky.config = {
-    alignment = 'top_right',
-    background = false,
-    border_width = 1,
-
-    cpu_avg_samples = 2,
-    double_buffer = true,
-    update_interval = 1.0,
-
-    default_color = 'green',
-    default_outline_color = 'green',
-    default_shade_color = 'dark green',
-    draw_borders = false,
-    draw_graph_borders = true,
-    draw_outline = false,
-    draw_shades = true,
-    extra_newline = false,
-    font = 'Fira Code:size=10',
-    gap_x = -1800,
-    gap_y = 40,
-    minimum_height = 950,
-    minimum_width = 300,
-
-    net_avg_samples = 2,
-    no_buffers = true,
-
-    out_to_console = false,
-    out_to_ncurses = false,
-    out_to_stderr = false,
-    out_to_wayland = false,
-    out_to_x = true,
-
-    own_window = true,
-    own_window_class = 'Conky',
-    own_window_type = 'desktop',
-    own_window_hints = 'undecorated,sticky,below,skip_taskbar,skip_pager',
-	own_window_argb_visual = true,
-	own_window_argb_value = 200,
-	own_window_colour = "#222222",
-
-    show_graph_range = false,
-    show_graph_scale = false,
-    stippled_borders = 0,
-    uppercase = false,
-    use_spacer = 'none',
-    use_xft = true,
-}
-
-
-if hostname == "minitonitchtop" then
-	conky.config.gap_x = 20
-    conky.config.font = 'Fira Code:size=14'
-end
-
-function disksbars()
-	if hostname == "minitonitchtop" then
-		return [[
-${color grey}root $color${fs_bar 6 /}
-]]
-	else
-		return [[
-${color grey}root $color${fs_bar 6 /}
-${color grey}home $color${fs_bar 6 /home}
-${color grey}OneT $color${fs_bar 6 /disks/OneTO/}
-${color grey}TwoT $color${fs_bar 6 /disks/TwoTO/}
-]]
-	end
-
-end
-
-function cpubars()
-	if hostname == "minitonitchtop" then
-		return [[
- ${color}${cpubar cpu1 8, 150} ${cpubar cpu2 8, 150}
- ${cpubar cpu3 8, 150} ${cpubar cpu4 8, 150}
-]]
-	else
-		return [[
- ${color}${cpubar cpu1 8, 120} ${cpubar cpu2 8, 120} ${cpubar cpu3 8, 120}
- ${cpubar cpu4 8, 120} ${cpubar cpu5 8, 120} ${cpubar cpu6 8, 120}
- ${cpubar cpu7 8, 120} ${cpubar cpu8 8, 120} ${cpubar cpu9 8, 120}
- ${cpubar cpu10 8, 120} ${cpubar cpu11 8, 120} ${cpubar cpu12 8, 120}
-]]
-	end
-end
-
-function networks()
-	if hostname == "minitonitchtop" then
-		return [[
- IP: $color${addrs wlo1}
- ${color grey}UP   $color${upspeedgraph wlo1 -x -t}
- ${color grey}DOWN $color${downspeedgraph wlo1 -x -t }
-]]
-	else
-		return [[
- IP: $color${addrs enp3s0}
- ${color grey}UP   $color${upspeedgraph enp3s0 -x -t}
- ${color grey}DOWN $color${downspeedgraph enp3s0 -x -t }
-]]
-	end
-end
-
-function gpu()
-	if hostname == "minitonitchtop" then
-		return [[
-	${color red} Todo
-]]
-	else
-		return [[
- ${color gray}Temp: ${nvidia temp}° 
- ${color gray}GPU: $color%${nvidia gpuutil} ${nvidiabar gpuutil}
- ${color gray}Mem: $color%${nvidia memperc} ${nvidiabar mem}
- ${color gray}Fan: $color%${nvidia fanlevel} ${nvidiabar fanlevel}
-]]
-	end
-
-end
-
--- Variables: https://conky.cc/variables
-conky.text = [[
- ${color gray}Date: $color${time %a %d %b %Y %H:%M}
- ${color gray}Uptime: $color$uptime on $kernel
-${color gray}RAM + SWAP $hr
- ${color gray}$color$memperc% ${membar 6}
- ${color gray}$color$swapperc% ${swapbar 6}
-${color gray}CPU $hr
-]]..cpubars()..[[
-${color gray}GPU $hr
-]]..gpu()..[[
-${color grey}File systems $hr
-]]..disksbars()..[[
-${color grey}Networking $hr
-]]..networks()..[[
-${color grey}Processes $hr
- ${color grey}Name                 PID   CPU%   MEM%
- ${color}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
- ${color}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
- ${color}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
- ${color}${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
- ${color gray}Count: $color$processes
-${color grey}Infos $hr
- $color${font FiraCode Nerd Font:size=10}${execi 1800 curl -s 'wttr.in/?format=4'}$font
- ${color gray}mto $color${new_mails /disks/TwoTO/Mails/minecraftonitch/INBOX/ 900} / ${mails /disks/TwoTO/Mails/minecraftonitch/INBOX/ 900} | ${color gray}d.t $color${new_mails /disks/TwoTO/Mails/d.tonitch/INBOX/ 900} / ${mails /disks/TwoTO/Mails/d.tonitch/INBOX/ 900} | ${color gray}d.a $color${new_mails /disks/TwoTO/Mails/debucquoy.anthony/INBOX/ 900} / ${mails /disks/TwoTO/Mails/debucquoy.anthony/INBOX/ 900}
-${color grey}TODO $hr
-$color${execi 60 todo list --sort priority}
-${color grey}CALENDAR $hr
-$color${execi 60 khal list}
-]]

git/.gitconfig

@@ -1,6 +1,6 @@
 [user]
 	email = tonitch@herisson.ovh
-	name = Anthony Debucquoy
+	name = tonitch
 	signingkey = 3D06B2E67463D272D769DF59A78D6421F083D42E
 [init]
 	defaultBranch = master
@@ -17,10 +17,10 @@
 	fap = fetch --all --prune
 [push]
 	autoSetupRemote = true
-[filter "lfs"]
+[sendemail]
-	process = git-lfs filter-process
+	smtpServer = mail.herisson.ovh
-	required = true
+	smtpEncryption = tls
-	clean = git-lfs clean -- %f
+	smtpServerPort = 587
-	smudge = git-lfs smudge -- %f
+	smtpUser = tonitch
-[credential]
+	smtpPass = bateaux
-	helper = store
+	annotate = yes

khal_todo_khard/.config/khal/config

@@ -1,30 +0,0 @@
-[calendars]
-
-	[[nextcloud_cal_local]]
-		path = ~/.cache/calendar/nextcloud/*
-		type = discover
-
-	[[nextcloud_card_local]]
-		path = ~/.cache/contact/nextcloud/*
-		type = discover
-
-[locale]
-	timeformat = %H:%M
-	dateformat = %d %b
-	longdateformat = %d %b %Y
-	datetimeformat = %d %b à %H:%M
-	longdatetimeformat = %a %d %b %Y %H:%M
-
-[default]
-	default_calendar = personal
-	highlight_event_days = True
-	timedelta = 14d
-	print_new = event
-
-[highlight_days]
-	color = dark green
-	default_color = dark blue
-	multiple = dark red
-
-[view]
-agenda_event_format = {calendar-color} {cancelled}{start-time} - {title}{repeat-symbol}{alarm-symbol}{reset}

khal_todo_khard/.config/khard/khard.conf

@@ -1,50 +0,0 @@
-[addressbooks]
-[[contacts]]
-path = ~/.cache/contact/**/*
-type = discover
-
-[general]
-debug = no
-default_action = list
-# These are either strings or comma seperated lists
-editor = vim, -i, NONE
-merge_editor = vimdiff
-
-[contact table]
-# display names by first or last name: first_name / last_name / formatted_name
-display = first_name
-# group by address book: yes / no
-group_by_addressbook = no
-# reverse table ordering: yes / no
-reverse = no
-# append nicknames to name column: yes / no
-show_nicknames = no
-# show uid table column: yes / no
-show_uids = yes
-# show kind table column: yes / no
-show_kinds = no
-# sort by first or last name: first_name / last_name / formatted_name
-sort = last_name
-# localize dates: yes / no
-localize_dates = yes
-# set a comma separated list of preferred phone number types in descending priority
-# or nothing for non-filtered alphabetical order
-preferred_phone_number_type = pref, cell, home
-# set a comma separated list of preferred email address types in descending priority
-# or nothing for non-filtered alphabetical order
-preferred_email_address_type = pref, work, home
-
-[vcard]
-# extend contacts with your own private objects
-# these objects are stored with a leading "X-" before the object name in the vcard files
-# every object label may only contain letters, digits and the - character
-# example:
-#   private_objects = Jabber, Skype, Twitter
-# default: ,  (the empty list)
-# private_objects = Jabber, Skype, Twitter
-# preferred vcard version: 3.0 / 4.0
-preferred_version = 3.0
-# Look into source vcf files to speed up search queries: yes / no
-search_in_source_files = no
-# skip unparsable vcard files: yes / no
-skip_unparsable = no

khal_todo_khard/.config/systemd/user/vdirsyncer.service

@@ -1,9 +0,0 @@
-[Unit]
-Description=Syncronise Nextcloud instance
-
-[Service]
-Type=oneshot
-ExecStart=nextcloudcmd /media/nextcloud 'https://tonitch:jOkN5UaCMRRnjLIe3cH9KEXzb@nc.debucquoy.me'
-
-[Install]
-WantedBy=default.target

khal_todo_khard/.config/systemd/user/vdirsyncer.timer

@@ -1,9 +0,0 @@
-[Unit]
-Description=Run nextcloud sync every 15 minutes
-
-[Timer]
-OnActiveSec=10min
-OnUnitActiveSec=10min
-
-[Install]
-WantedBy=timers.target

khal_todo_khard/.config/todoman/config.py

@@ -1,5 +0,0 @@
-path = "~/.cache/calendar/nextcloud/*/"
-# date_format = "%d/%m/%Y"
-# time_format = "%H:%M"
-default_list = "whatdo"
-default_due = 0

khal_todo_khard/.config/vdirsyncer/config

@@ -1,36 +0,0 @@
-[general]
-status_path = "~/.vdirsyncer/status/"
-
-[storage nextcloud_cal_remote]
-	type = "caldav"
-	url = "https://nc.debucquoy.me/remote.php/dav"
-	username = "tonitch"
-	password.fetch = ["command", "cat", "~/.config/pass/vdirsyncer.txt"]
-
-[storage nextcloud_card_remote]
-	type = "carddav"
-	url = "https://nc.debucquoy.me/remote.php/dav"
-	username = "tonitch"
-	password.fetch = ["command", "cat", "~/.config/pass/vdirsyncer.txt"]
-
-[storage nextcloud_cal_local]
-	type = "filesystem"
-	path = "~/.cache/calendar/nextcloud"
-	fileext = ".ics"
-
-[storage nextcloud_card_local]
-	type = "filesystem"
-	path = "~/.cache/contact/nextcloud"
-	fileext = ".vcf"
-
-[pair nextcloud_cal]
-	a = "nextcloud_cal_remote"
-	b = "nextcloud_cal_local"
-	collections = ["from a"]
-	metadata= ["color", "displayname", "description", "order"]
-
-[pair nextcloud_card]
-	a = "nextcloud_card_remote"
-	b = "nextcloud_card_local"
-	collections = ["from a"]
-	metadata= ["displayname"]

nvim/.config/nvim/after/ftplugin/c.lua

@@ -0,0 +1,5 @@
+vim.lsp.start({
+	name = 'clangd',
+	cmd = {'clangd'},
+	-- root_dir = vim.fs.root(args.buf, {'Makefile'})
+})

nvim/.config/nvim/after/ftplugin/cmake.lua

@@ -0,0 +1,4 @@
+vim.lsp.start({
+	name = 'cmake-language-server',
+	cmd = {'cmake-language-server'},
+})

nvim/.config/nvim/after/ftplugin/lua.lua

@@ -0,0 +1,4 @@
+vim.lsp.start({
+	name = 'lua-language-server',
+	cmd = {'lua-language-server'},
+})

nvim/.config/nvim/after/ftplugin/markdown.lua

@@ -1 +0,0 @@
-vim.opt.textwidth = 100

nvim/.config/nvim/after/ftplugin/python.lua

@@ -1,5 +1,4 @@
-vim.keymap.set('n', '<F12>', ":Repl<cr>")
+vim.lsp.start({
-vim.keymap.set('v', '<F12>', ":'<,'>Repl<cr>")
+	name = 'jedi',
-
+	cmd = {'jedi-language-server'},
-vim.keymap.set('n', '<F11>', ":ReplSend<cr>")
+})
-vim.keymap.set('v', '<F11>', ":'<,'>ReplSend<cr>")

nvim/.config/nvim/after/ftplugin/racket.lua

@@ -1,5 +0,0 @@
-vim.keymap.set('n', '<F12>', ":Repl<cr>")
-vim.keymap.set('v', '<F12>', ":'<,'>Repl<cr>")
-
-vim.keymap.set('n', '<F11>', ":ReplSend<cr>")
-vim.keymap.set('v', '<F11>', ":'<,'>ReplSend<cr>")

nvim/.config/nvim/after/ftplugin/sh.lua

@@ -0,0 +1,4 @@
+vim.lsp.start({
+	name = 'bash-language-server',
+	cmd = {'bash-language-server'},
+})

nvim/.config/nvim/after/ftplugin/tex.lua

@@ -0,0 +1,4 @@
+vim.lsp.start({
+	name = 'texlab',
+	cmd = {'texlab'},
+})

nvim/.config/nvim/after/ftplugin/zig.lua

@@ -1 +0,0 @@
-vim.g.zig_fmt_autosave = 0

nvim/.config/nvim/init.lua

@@ -1,50 +0,0 @@
-vim.cmd('set runtimepath^=~/.vim runtimepath+=~/.vim/after')
-vim.cmd('let &packpath = &runtimepath')
-vim.cmd('let g:python3_host_prog="/usr/bin/python"')
-vim.cmd('source ~/.vimrc"')
-
-
--- Enable LSPs
-vim.lsp.enable('bashls')
-vim.lsp.enable('clangd')
-vim.lsp.enable('cmake')
-vim.lsp.enable('jdtls')
-vim.lsp.enable('jedi_language_server')
-vim.lsp.enable('lua_ls')
-vim.lsp.enable('texlab')
-vim.lsp.enable('zls')
-
--- LSPs config
-vim.lsp.config("lua_ls", {
-	settings = {
-		Lua = {
-			diagnostics = {
-				globals = { "vim" }
-			},
-			workspace = {
-				checkThirdParty = "Apply",
-				telemetry = { enable = false },
-				library = {
-					-- vim.env.VIMRUNTIME,
-					"${3rd}/love2d/library"
-				}
-			}
-		},
-	}
-})
-
-vim.lsp.config("zls", {
-	on_attach = function(client, bufnr)
-		vim.lsp.completion.enable(true, client.id, bufnr, {
-			autotrigger = true,
-		})
-	end
-})
-
--- vim.lsp.config("jdtls", {
--- 	settings = {
--- 		java = {
---
--- 		}
--- 	}
--- })

nvim/.config/nvim/init.vim

@@ -0,0 +1,4 @@
+set runtimepath^=~/.vim runtimepath+=~/.vim/after
+let &packpath = &runtimepath
+let g:python3_host_prog="/usr/bin/python"
+source ~/.vimrc

nvim/.config/nvim/lua/plugin/dap/c.lua

@@ -1,51 +0,0 @@
-local dap = require('dap')
-
-dap.adapters.gdb = {
-    id = 'gdb',
-    type = 'executable',
-    command = 'gdb',
-    args = { '--quiet', '--interpreter=dap' },
-}
-
-dap.configurations.c = {
-	{
-		name = 'Run executable (GDB)',
-		type = 'gdb',
-		request = 'launch',
-		program = function()
-			local path = vim.fn.input({
-				prompt = 'Path to executable: ',
-				default = vim.fn.getcwd() .. '/',
-				completion = 'file',
-			})
-			return (path and path ~= '') and path or dap.ABORT
-		end,
-	},
-	{
-		name = 'Run executable with arguments (GDB)',
-		type = 'gdb',
-		request = 'launch',
-		program = function()
-			local path = vim.fn.input({
-				prompt = 'Path to executable: ',
-				default = vim.fn.getcwd() .. '/',
-				completion = 'file',
-			})
-			return (path and path ~= '') and path or dap.ABORT
-		end,
-		args = function()
-			local args_str = vim.fn.input({
-				prompt = 'Arguments: ',
-			})
-			return vim.split(args_str, ' +')
-		end
-	},
-	{
-		name = 'Attach to process (GDB)',
-		type = 'gdb',
-		request = 'gdb',
-		processId = require('dap.utils').pick_process,
-	},
-}
-
-dap.configurations.rust = dap.configurations.c

nvim/.config/nvim/lua/plugin/dap/zig.lua

@@ -1,48 +0,0 @@
-local dap = require('dap')
-
-dap.adapters.lldb = {
-    id = 'lldb',
-    type = 'executable',
-    command = 'lldb-dap',
-}
-
-dap.configurations.zig = {
-	{
-		name = 'Run executable (lldb)',
-		type = 'lldb',
-		request = 'launch',
-		program = function()
-			local path = vim.fn.input({
-				prompt = 'Path to executable: ',
-				default = vim.fn.getcwd() .. '/',
-				completion = 'file',
-			})
-			return (path and path ~= '') and path or dap.ABORT
-		end,
-	},
-	{
-		name = 'Run executable with arguments (lldb)',
-		type = 'lldb',
-		request = 'launch',
-		program = function()
-			local path = vim.fn.input({
-				prompt = 'Path to executable: ',
-				default = vim.fn.getcwd() .. '/',
-				completion = 'file',
-			})
-			return (path and path ~= '') and path or dap.ABORT
-		end,
-		args = function()
-			local args_str = vim.fn.input({
-				prompt = 'Arguments: ',
-			})
-			return vim.split(args_str, ' +')
-		end
-	},
-	{
-		name = 'Attach to process (lldb)',
-		type = 'lldb',
-		request = 'lldb',
-		processId = require('dap.utils').pick_process,
-	},
-}

nvim/.config/nvim/plugin/configs.lua

@@ -1,6 +1,2 @@
 vim.g.vimtex_view_method="zathura"
 vim.opt.completeopt="menu,popup,noinsert,noselect"
-
-require("dapui").setup()
-require("plugin.dap.c")
-require("plugin.dap.zig")

nvim/.config/nvim/plugin/configs.vim

@@ -1,3 +0,0 @@
-nnoremap sd :lua vim.diagnostic.open_float()<CR>
-nnoremap <c-t> :FloatermToggle<CR>
-let g:neomake_open_list = 2

nvim/.config/nvim/plugin/dap_keybinds.lua

@@ -1,26 +0,0 @@
-vim.keymap.set('n', '<F5>', function() require('dap').continue() end)
-vim.keymap.set('n', '<F10>', function() require('dap').step_over() end)
-vim.keymap.set('n', '<F11>', function() require('dap').step_into() end)
-vim.keymap.set('n', '<F12>', function() require('dap').step_out() end)
-vim.keymap.set('n', '<Leader>b', function() require('dap').toggle_breakpoint() end)
-vim.keymap.set('n', '<Leader>B', function() require('dap').set_breakpoint() end)
-vim.keymap.set('n', '<Leader>lp', function() require('dap').set_breakpoint(nil, nil, vim.fn.input('Log point message: ')) end)
-vim.keymap.set('n', '<Leader>dr', function() require('dap').repl.open() end)
-vim.keymap.set('n', '<Leader>dl', function() require('dap').run_last() end)
-vim.keymap.set({'n', 'v'}, '<Leader>dh', function()
-  require('dap.ui.widgets').hover()
-end)
-vim.keymap.set({'n', 'v'}, '<Leader>dp', function()
-  require('dap.ui.widgets').preview()
-end)
-vim.keymap.set('n', '<Leader>df', function()
-  local widgets = require('dap.ui.widgets')
-  widgets.centered_float(widgets.frames)
-end)
-vim.keymap.set('n', '<Leader>ds', function()
-  local widgets = require('dap.ui.widgets')
-  widgets.centered_float(widgets.scopes)
-end)
-vim.keymap.set('n', '<F9>', function() require("dapui").toggle() end)
-vim.keymap.set('n', '<M-k>', function() require("dapui").eval() end)
-vim.keymap.set('v', '<M-k>', function() require("dapui").eval() end)

nvim/.config/nvim/plugin/lsp.vim

@@ -5,11 +5,3 @@ function! OpenCompletion()
 endfunction
 
 autocmd InsertCharPre * if &omnifunc != "" | call OpenCompletion() | endif
-
-" https://github.com/mfussenegger/nvim-jdtls?tab=readme-ov-file
-nnoremap <A-o> <Cmd>lua require'jdtls'.organize_imports()<CR>
-nnoremap crv <Cmd>lua require('jdtls').extract_variable()<CR>
-vnoremap crv <Esc><Cmd>lua require('jdtls').extract_variable(true)<CR>
-nnoremap crc <Cmd>lua require('jdtls').extract_constant()<CR>
-vnoremap crc <Esc><Cmd>lua require('jdtls').extract_constant(true)<CR>
-vnoremap crm <Esc><Cmd>lua require('jdtls').extract_method(true)<CR>

stowed.list

@@ -1,11 +1,9 @@
-aerc
 bin
 bspwm
 dmenu
 dunst
 feh
 git
-khal_todo_khard
 nvim
 picom
 polybar

sxhkd/.config/sxhkd/sxhkdrc

@@ -192,8 +192,7 @@ super + shift + {comma,period}
 # Change window gap
 
 super + g
-	{bspc config window_gap 0 && bspc config top_padding 0 && bspc config bottom_padding 0 && bspc config right_padding 0 && bspc config left_padding 0,\
+	bspc config -d focused window_gap {$gap,$(($gap+$cgap)),$(($gap+$cgap+$gap))}
-	bspc config window_gap $(($gap+$cgap)) && bspc config top_padding $(($PANEL_HEIGHT-($gap-$cgap))) && bspc config bottom_padding -$gap && bspc config right_padding -$gap && bspc config left_padding -$gap}
 
 super + button{4,5}
 	bspc config -d focused window_gap $((`bspc config -d focused window_gap` {+,-} 2 ))

tmux/.config/tmux/tmux.conf

@@ -1,6 +1,5 @@
 set -g mouse
 set -g set-clipboard on
-set -g focus-events on
 
 bind h selectp -L 
 bind j selectp -D 

zsh/.zshrc

@@ -20,7 +20,7 @@ zstyle ':completion:*' cache-path ~/.zsh/cache
 HISTFILE=~/.zhistory
 HISTSIZE=1000
 SAVEHIST=500
-#export EDITOR=/usr/bin/vim
+export EDITOR=/usr/bin/vim
 #export VISUAL=/usr/bin/gvim
 WORDCHARS=${WORDCHARS//\/[&.;]}                                 # Don't consider certain characters part of the word
 
@@ -72,8 +72,6 @@ alias open="xdg-open"
 alias sxiv=nsxiv
 alias :q=exit
 alias vim=nvim
-alias radio="mpv https://radio.freenode.net/radio.ogg --volume=30" 
-alias calc="calcurse-caldav && calcurse && calcurse-caldav"
 
 # Theming section  
 autoload -U compinit colors zcalc
@@ -179,6 +177,9 @@ zmodload zsh/terminfo
 # Enabling fzf capabilities
 source /usr/share/fzf/*.zsh
 
+source /usr/share/enhancd/init.sh
+export ENHANCD_ENABLE_DOUBLE_DOT=false
+
 bindkey "$terminfo[kcuu1]" history-substring-search-up
 bindkey "$terminfo[kcud1]" history-substring-search-down
 bindkey '^[[A' history-substring-search-up			
@@ -216,8 +217,4 @@ case $(basename "$(cat "/proc/$PPID/comm")") in
   		ZSH_AUTOSUGGEST_HIGHLIGHT_STYLE='fg=8'
     ;;
 esac
-
+# PROG=tea _CLI_ZSH_AUTOCOMPLETE_HACK=1 source "/home/tonitch/.config/tea/autocomplete.zsh"
-# Add level of ranger nesting if in ranger
-if [ -n "$RANGER_LEVEL" ]; then 
-    export RPROMPT="[r$RANGER_LEVEL]$RPROMPT";
-fi